Disclaimer

APPLICATION TO SURFACE: Unwind adhesive film and apply adhesive side to  mounting surface. Apply firm pressure. Recommended application temperature to  achieve best results is 65°F (18°C) or above. Proper bonding may not occur unless  adhesive and surface material are both at 65°F (18°C) or above. 

  • Keep the paddle out of excessive heat to keep the adhesive in good working order. Keep dry. 

NOTE: When applying pressure sensitive adhesive films to any surface, be sure that  the surface is free from oil or other surface contaminants such as powder, dust or  release agents. Adhesive performance should be carefully checked when used on  substrates containing plasticizers. 

NOTE: Shelf life is one year from date of shipment, when stored in a cool dry place  below 76°F (24°C). 

All statements, technical information and recommendations related to the Seller’s  product are based on information believed to be reliable, but the accuracy or  completeness thereof is not guaranteed. Before utilizing the product, the user should  determine the suitability of the product for its intended use. The user assumes all  risks and liability whatsoever in connection with such use. 

Any statements or recommendations of the Seller which are not contained in the  Seller’s current publications shall have no force or effect unless contained in an  agreement signed by an authorized officer of the Seller. 

The statements contained herein are made in lieu of all warranties, expressed or  implied, including but not limited to the implied warranties of merchantability and  fitness for a particular purpose which warranties are hereby expressly disclaimed. 

SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL  THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY  INJURY OR FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL  DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER’S  PRODUCTS THAT WERE DEFECTIVE.